Driving in the nighttime is a pretty tricky experience, especially if you have your tail lights broken or not working properly. The consequences of such traveling can be more than sad for both a driver and their passengers. To avoid any possible accidents caused by non-functioning tail lights, do replace them once the time comes. Upgrade your vehicle with a new, highly efficient set of YITAMOTOR lights and feel more confident than ever by informing other drivers whether you're about to turn or stop. And when the night comes calling, you will be ready to start your way.
Light Source: Halogen (use the stock bulbs, no bulbs included)
Surface finish: Chrome housing w/ clear lens
Location: Mounts using factory mounting locations
Product Fit: CAD designed to provide a perfect, factory type fit
Weather Sealed: Completely weather sealed to keep the elements out
(Please note that the bulbs are NOT included, Please use the original bulbs, High power bulbs are not recommend.)
Things you'll need: 1. Trim panel removal tool, socket wrench, or screwdriver (depending on the fasteners used in the assembly) 2. Tail light assembly that matches your vehicle's specs
Installation: Step 1. Remove the old tail light. First thing you have to do is undo the mounting screws on the outside, if there’s any. You’ll have to open the trunk or any rear door or opening on the vehicle to access the back of the tail light. The wiring harness must be disengaged from the assembly through its back. Once the wiring harness is out, you can now undo the mounting screws or nuts, whatever fastener is used. With no more screws or nuts holding it in place, you can push out the assembly from behind. Step 2. Check if the tail light assembly you just removed is the same as the new one. See if they have the same components, design, and fasteners to ensure proper fitting. Step 3. Fix the new assembly into the tail light pocket. Once it’s fitted into place, secure it with the screws or nuts. Tighten them properly. You can now plug in the wiring harness that you removed earlier. Step 4. Test the new assembly. Switch on the tail lights to see if they work. If not, then some adjustments should be done to the newly installed tail light kit. Step 5. Put back any cover, trim, or component that was removed to access the tail light assembly.
Free shipping on all orders. No minimum purchase. It normally takes 1-2 business days for us to process your order. Please note that this does not include holidays and weekends. Shipping time will normally cost 2-8 business days. Shipping time is estimated and commences from the date of shipping, rather than the date of the order, and can take longer than expected date due to the invalid address, customs clearance procedures or other causes.
For large items such as bumpers, tonneau covers, we generally delivery by Fedex and P.O.Box will not be available for shipping.
1.Question:Do these fit on a 99 round body chevy? Answer:They are for 1992-1999 Chevy Suburban and Tahoe, FITS BARN DOOR & LIFT GATE ONLY.
2.Question:Will this fit a 1994 cheyenne 1500 pickup Answer:Yes, the tail light fit for C/K 1500 cheyenne pickup.