YITAMOTOR Front Lower Control Arm Ball Joint Set for 2001-2006 Hyundai Santa Fe

Feature :
High Quality Steel Material, Improve the Feeling of Riding.
Heat Treatment Hardness, With Tear Resistance, Corrosion and Wear Resistant Durability.
Pre-drilled Sway bar Mounting Holes, Easy to Installation.

Fitment :
2001 - 2006 Hyundai Sante FE

Package :
1x Front Passenger Side Lower Control Arm & Ball Joints Assembly - K80348
1x Front Driver Side Lower Control Arm & Ball Joints Assembly - K80349

Installation:
1. Before replacing the suspension, stop the car on the lifting station, shut down the engine and take protective measures. Straighten the steering wheel, use the brake lock to step on the brake, and lift the car chassis to check the position.
2. After lifting the vehicle to a height suitable for operation, remove the suspension parts and related accessories to be replaced, and complete the unloading of the front and rear suspension parts.
3. For bolts that are difficult to remove, you need to clean them first or use bolt loosening agent to assist in the removal. After cleaning the mounting holes in the original position, perform new parts correction installation.
4. Replace the suspension parts one by one, pay attention to tighten the bolts with the specified torque with a torque wrench according to the original angle, and replace and fix it at the original angle.

Note:
- Please make sure that whether the control arm fits your vehicle or not before placing order.
- The product already contained grease and no additional addition is required.

California Residents: Prop 65 Warning

WARNING:Cancer and Reproductive Harm

Visit:www.p65warnings.ca.gov