Q: What should I pay attention to during installation?
A: Thanks for asking such a great question.
1.Check to make sure that the wheel spacer fits perfectly with the hub/axle stub and the inner mounting surface of the wheel. 2.Make sure that the wheel bolts being used are of the appropriate length, not too long or too short. 3.DO NOT proceed if both of the wheel spacer do not fit. 4.Please be sure to clean the rust on the hub before starting the installation, otherwise it will affect the working life of the spacers. 5.Make sure that you get 5-7 FULL TURNS of the lugs when installing. Torque them down to the manufacturers specs (up to and not greater than 110ft lbs). 6.Avoid using an impact wrench because improper usage may cause the lug nuts/bolts to break or loosen while driving causing a potential injury or accident. 7.All lug nuts, bolts and torque must be checked after driving the first 50 miles after installation. Afterwards, please check all lug nuts and bolts every 3,000-5,000 miles. 8.Alignment is necessary after installation, this will prevent any wobble and vibration from occurring. 9.Professional installation is recommended. Professional instructions are included for your reference.
Free shipping on all orders. No minimum purchase. It normally takes 1-2 business days for us to process your order. Please note that this does not include holidays and weekends. Shipping time will normally cost 2-8 business days. Shipping time is estimated and commences from the date of shipping, rather than the date of the order, and can take longer than expected date due to the invalid address, customs clearance procedures or other causes.
For large items such as bumpers, tonneau covers, we generally delivery by Fedex and P.O.Box will not be available for shipping.