Undo the screws, clips, or retainer springs that hold the headlight in place.
Disconnect the wiring from the assembly.
Detach the headlight from the vehicle to replace it with a new one.
Fit in the new headlight assembly.
Fix the new headlight into place and make sure that the screws, clips, or retainer springs are sealed.
Reconnect the wiring that was unplugged from the assembly.
Put back the grille and other components that you removed. Seal them back into place.
Test the new assembly.
HOW TO ADJUST YOUR HEADLIGHTS?
Find the adjustment screws.Firstly, Locate the adjustment screws on your vehicle.
Adjust the headlights individually. The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.
Adjust the vertical field. Turn the screw on the top of the light housing clockwise to raise the lights and counterclockwise to lower the lights. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.
Adjust the horizontal field. The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.
Test your results.
Free shipping on all orders. No minimum purchase. It normally takes 1-2 business days for us to process your order. Please note that this does not include holidays and weekends. Shipping time will normally cost 2-8 business days. Shipping time is estimated and commences from the date of shipping, rather than the date of the order, and can take longer than expected date due to the invalid address, customs clearance procedures or other causes.
For large items such as bumpers, tonneau covers, we generally delivery by Fedex and P.O.Box will not be available for shipping.