Headlight Assembly For 2009-2018 Dodge Ram 1500/2500/3500 Black Quad Headlights Lamps Left+Right

Product Description

YITAMOTOR is American automobile parts brand specialized in producing quality and high-performance auto parts. Our headlights are thoroughly tested to deliver smooth operation as well as for impact and heat resistance and endurance against rough road conditions over a long period of time. Headlight performance has steadily improved throughout the automobile age.  Nearly half of all traffic-related fatalities occur in the dark, despite only 25% of traffic traveling during darkness.

Fitment

• For 2009-2018 Dodge Ram 1500/2500/3500 Black Quad 

Features

• Clear Visibility

The high-grade clear lens offers better visibility, and the replacement headlight assembly can light up the entire road as a much brighter alternative to dim, yellow headlights.

• Weather-sealed

Weather-sealed means that our headlights prevent any water from seeping into your vehicle’s electrical system.

• Simplicity

Our replacement headlights fit directly into your vehicle’s factory wiring harness for hassle-free installation. No additional modifications or drilling are required.

• Excellent Value & Durability

YITAMOTOR headlights are of equal quality to the original manufacturer set at a lower price. Some businesses manufacture their headlight lenses using low-quality materials in order to save costs. YITAMOTOR’s headlights, however, are made of ABS & PC, which are highly temperature and impact-resistant materials. YITAMOTOR headlights are both extremely durable and compact.

• Safety Compliance

Our headlights strictly adhere to all SAE and DOT safety standards

• Plug and Play

These tail lights can be directly and easily bolted on without any modifications during the installation process.

Installation

• 1. Undo the screws, clips, or retainer springs that hold the headlight in place.
• 2. Disconnect the wiring from the assembly.
• 3. Detach the headlight from the vehicle to replace it with a new one.
• 4. Fit in the new headlight assembly.
• 5. Fix the new headlight into place and make sure that the screws, clips, or retainer springs used are sealed.
• 6. Reconnect the wiring that was unplugged from the assembly.
• 7. Put back the grille and other components that you removed. Seal them back into place.
• 8. Test the new assembly.

How to Adjust the Headlight?

Before you begin to adjust the light, make sure to check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.

• 1. Find the adjustment screws. Firstly, locate the adjustment screws on your vehicle.
• 2. Adjust the headlights individually. The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.
• 3. Adjust the vertical field. The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light the beam shines directly on or just below the center of the tape line on the wall.
• 4. Test your results.

Specifications

California Residents: Prop 65 Warning

WARNING: Cancer and Reproductive Harm

Visit:www.p65warnings.ca.gov