for 2010-2013 KIA Forte Sedan 4Dr Clear Bumper Fog Light Lamps+Wiring+Switch L+R

for 2010-2013 Kia Forte Sedan Model

Fogs Bulb Style: 881 Halogen
Power: 12V, 27W Each Bulb
Style: OE Factory Style
Material: Clear Polycarbonate Lens
Package Included:
Pair of Fog Lamp with halogen bulb included
Pair of Fog Light Cover
Required Wiring Harness Switch Kit

Package Included:
1 Pair Fog Light For Left and Right Side + Bulbs + Wiring + Switch + Relay + Bezel

Installation:
1. Closely check your existing fog light assembly.
2. Remove the wiring harness from the fog light assembly.
3. Take out the mounting screws of your old fog light assembly. These screws are normally found at the back of the fog light assembly.
4. Take out the fog light assembly from your automobile.
5. Get your new fog light and install it on your vehicle using the mounting screws that you removed earlier.
6. Tighten the mounting screws just enough to keep your new fog light assembly securely installed. Be careful not to tighten the screws too much or they might cause damage to the assembly.
7. Get the wiring harness connected to your new fog light assembly.
8. Switch the fog lights on to see if they are working properly.

Fog lights illuminate dark edges of the road where headlights can't. They are used to provide better visibility while driving through fog.

Fog is typically less dense closer to the ground. Because fog lights are mounted lower on the vehicle, they encounter less glare and can light the path ahead much further.

Headlights point straight ahead and can cause glare when they reflect light from fog or snow directly back into a driver's eyes, as seen in this picture.

California Residents: Prop 65 Warning

WARNING: Cancer and Reproductive Harm

Visit:www.p65warnings.ca.gov