YITAMOTOR® 1998-2002 Honda Accord Headlight Assembly Headlamp Chrome Housing Amber Reflector

Product Description

After many years and miles are driven, the headlights on the average car or truck have been dimmed by abrasion from road debris, and yellowed and discolored from the sun and elements. A dim, cloudy, yellowed, or non-functioning headlight makes driving dangerous. Don’t risk your safety because of high dealer prices, you can get this Factory style headlight from YITAMOTOR for much less. It’s the same as original equipment in fit, performance, and function.

Fitment

• 1998-2002 Honda Accord DX Sedan 4-Door
• 1998-2002 Honda Accord EX Coupe 2-Door
• 1998-2002 Honda Accord EX Sedan 4-Door
• 1998-2002 Honda Accord LX Coupe 2-Door
• 1998-2002 Honda Accord LX Sedan 4-Door
• 2000 Honda Accord SE Sedan 4-Door
• 2001 Honda Accord Value Package Sedan 4-Door
• 2002 Honda Accord Value Package Sedan 4-Door
• 2002 Honda Accord SE Coupe 2-Door

Features

• Tougher-Than-Nails Construction

Heavy-duty housings are made of superior OEM Grade ABS plastic to ensure exceptional resistance to weather and impact that guarantees durability for years ahead.

• Plug-n-Play Installation

As a fully compatible replacement for factory parts, our bolt-on style headlights are designed for quick and easy installation, requiring no modification or drilling.

• Guaranteed Quality

Our headlights are thoroughly tested to deliver smooth operation as well as for impact and heat resistance and endurance against rough road conditions over a long period of time. The units are completely sealed to prevent moisture from being trapped inside the housing.

• Product Compliance

YITAMOTOR strictly adheres to DOT & SAE safety standards which all OE light manufacturers must abide by.

How to Adjust Your Headlights

Before taking your vehicle out on the road, make sure to first properly adjust your headlights. Park your vehicle on a level surface about 10 to 25 feet from a wall and turn on the headlights. The brightest part of the beams should not be any higher than 3.5 feet above the ground. Follow the steps below to make adjustments:

• 1. Find the adjustment screws. First, locate the adjustment screws on your vehicle.
• 2. Adjust the headlights individually. The headlights should be adjusted one at a time. Put a towel over a chair in front of the light you want to block. Covering the light directly can damage the plastic lens.
• 3. Adjust the vertical field. The screw-on top of the light housing should be turned clockwise to raise the light and counterclockwise to lower the light. The headlight should be adjusted until the top of the most intense part of the beam shines directly on or just below the center of the tape line on the wall.
• 4. Adjust the horizontal field. The screw on the side of the light housing should be turned to adjust the headlight laterally. Adjust the lens so that the most intense part of the beam shines to the right of the vertical line.
• 5. Test your results.

Specifications

California Residents: Prop 65 Warning

WARNING: Cancer and Reproductive Harm

Visit:www.p65warnings.ca.gov