2003-2006 Chevy Avalanche And 2003-2007 Chevrolet Silverado 1500 2500 3500 1500HD 2500HD Headlight Assembly

Fitment Attention: Fit 2003-2006 Chevy Silverado 1500 2500 3500 1500HD 2500HD pickup, 2007 Silverado 1500 1500HD 2500HD 3500 Classic Body Pickup Only.*** 2003-2006 Chevy Avalanche 1500 2500 Pickup.*[Attention]* Not Fit Avalanche with Body Cladding Model.
Sparkling Illumination: New lens and reflector provide superior lighting and ensure a pleasurable and comfortable driving experience.
Guaranteed Quality: Thoroughly tested to deliver smooth operation and completely sealed to prevent moisture from being trapped inside the housing. For toughness, impact resistance, and heat resistance. To endure rough road conditions over a long time.
OEM: DOT and SAE certification. Made by OEM approved & ISO certified manufacturers, with material that meets or exceeds OEM requirements.
Plug-n-play installation: These bolt-on style headlights are designed for quick and easy installation. There's no need for any modifications, they drop right into the factory location.

Product Features:

Size:Left + Right Side with Front Signal Light Black Housing Clear Reflector Lens
Working Voltage: DC 12V
Power: 55W
Bulb Type: 9006 Halogen Bulb
Replace Parts Number: GM2502224, GM2503224
Hollander Number: 116-59500R / 116-59501L
Clear Glass Lens provide the bright illumination in any weather an darkness
Compatible Models:

2003-2006 Chevy Silverado 1500/2500/3500/1500 HD/2500 HD Pickup
2007 Chevy Silverado 1500/1500 HD/2500 HD/3500 Classic Body Pickup Only
2003-2006 Chevy Avalanche 1500/2500 Pickup (Without Body Cladding)

Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.?

1. Find the adjustment screws. Firstly, locate the adjustment screws on your vehicle.

2. Adjust the headlights individually. The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.

3. Adjust the vertical field. The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.

4. Test the result.

Problems and Solutions

The headlights on your car have been dimmed by abrasion from road debris?
Factory headlights not bright enough?
Yellowed and discolored from the sun and elements?

New VS Old

A dim, cloudy, yellowed, damaged or non-functioning headlight makes driving dangerous.
New will makes your car look newer, and give you and your family safer nighttime driving.

See farther. See wider, See better

A new pair of headlights from us allow you to see the road in front of you clearly during the night and in any bad weather that may arise.

California Residents: Prop 65 Warning

WARNING: Cancer and Reproductive Harm

Visit: www.p65warnings.ca.gov