Exact OEM Fit - Fog light assembly for 07-14 Suburban/Tahoe/ 07-13 Avalanche/ 10-13 Camaro/ 15-16 Colorado/ 15 Silverado/GMC Acadia/Yukon/ Yukon XL/Sierra .Provides a factory-installed look once mounted. No vehicle modifications are required. Not including a wiring harness. You need to buy correct wire which depends on your car model. Package included: one pair of fog lights(driver and passenger side),with 5202/PS-12V 24W halogen bulb. SAE/DOT Approved.Thoroughly tested to meet federal and international standards and are fully street legal. Made by OEM approved manufacturer that meets or exceeds OE standard.Guaranteed to fit and function like the original.For OEM:15839896,22872763,7R3Z15200A,FO2590111,GM2590104,1225-0110.
Poor visibility of the road caused by heavy snow, rain, or thick fog is a quite dangerous thing because of possible car accidents. Most drivers would rather stay at home than travel in such severe conditions, but what if you do have to drive your way despite the weather? With their incredible line of fog lights, We make it possible for every vehicle to continue its path no matter how miserable the conditions are. The parts offer both maximum driving safety and neck-braking design everyone is craving for. These lights will enable you to see the road ahead with an impressive amount of clarity, giving off spectacular illumination that is extremely stylish as well.
Specification: Bulb Type: 5202 Halogen Bulb Working Voltage: DC 12V Power: 24W each bulb Wiring Harness: Not included Color Finish: Black housing w/ Clear lens
Part Number: 1225-0110 OEM: 15839896, 22872763, 7R3Z15200A PARTSLINK: FO2590111, GM2590104
Location: Mounts using factory mounting locations Product Fit: CAD designed to provide a perfect, factory type fit Weather Sealed: Completely weather sealed to keep the elements out
Quantity Sold: 1 Pair Fog Light For Left and Right Side + Bulbs.
Package Include: 1 Pair Fog Lights (Left & Right Side)
Note: Most vehicles have a hole in the firewall pre-drilled at the factory for the purpose of running wires from under the hood to the interior.
Installation: 1. Closely check your existing fog light assembly. 2. Remove the wiring harness from the fog light assembly. 3. Take out the mounting screws of your old fog light assembly. These screws are normally found at the back of the fog light assembly. 4. Take out the fog light assembly from your automobile. 5. Get your new fog light and install it on your vehicle using the mounting screws that you removed earlier. 6. Tighten the mounting screws just enough to keep your new fog light assembly securely installed. Be careful not to tighten the screws too much or they might cause damage to the assembly. 7. Get the wiring harness connected to your new fog light assembly. 8. Switch the fog lights on to see if they are working properly.
Fog lights illuminate dark edges of the road where headlights can't. They are used to provide better visibility while driving through fog. But, you can also use it when going through places where rain, snow, or dust may be giving you a hard time moving forward with confidence.
Fog is typically less dense closer to the ground. Because fog lights are mounted lower on the vehicle, they encounter less glare and can light the path ahead much further.
Headlights point straight ahead and can cause glare when they reflect light from fog or snow directly back into a driver's eyes, as seen in this picture. Because fog lights are angled to the side, glare is reduced and sides of the road are more visible.
Free shipping on all orders. No minimum purchase. It normally takes 1-2 business days for us to process your order. Please note that this does not include holidays and weekends. Shipping time will normally cost 2-8 business days. Shipping time is estimated and commences from the date of shipping, rather than the date of the order, and can take longer than expected date due to the invalid address, customs clearance procedures or other causes.