This compressor comes pre-filled with the correct amount of oil. Thus, there is no need to add any additional oil to your system. Please add refrigerant to 70-80% without filling up. There may be noise if the refrigerant is added too much.
1. Once the old compressor has been removed, begin by removing the receiver/drier or accumulator, and the expansion valve or orifice tube from the vehicle. 2. Next, flush the condenser and evaporator using a non-oil based A/C flush. The valve must be removed on expansion valve system before the evaporator can be flushed. Flush evaporators from inlet to outlet. 3. Install the new receiver drier or accumulator, and new expansion valve or orifice tube. 4. Next, install the new or remanufactured A/C Compressor. 5. Install and tighten the A/C Compressor mounting bolts. 6. Reconnect any electrical connectors to the A/C Compressor. 7. Re-install the refrigerant lines and A/C belt to the A/C Compressor. 8. Reconnect the negative battery cable. 9. Evacuate the A/C system with an A/C servicing machine for at least one hour. 10. Check the system for leaks. 11. If there are no leaks, install the refrigerant charge (Check the A/C system sticker under the hood of the vehicle for the proper amount and type of refrigerant for the system). Then, let the system set for 2 minutes. Doing so will allow the refrigerant to carry the oil and spread more evenly throughout the system. 12. Start the vehicle's engine and turn on the A/C system.
1 x A/C Compressor ( Professional Installer is Highly Recommended )
Free shipping on all orders. No minimum purchase. It normally takes 1-2 business days for us to process your order. Please note that this does not include holidays and weekends. Shipping time will normally cost 2-8 business days. Shipping time is estimated and commences from the date of shipping, rather than the date of the order, and can take longer than expected date due to the invalid address, customs clearance procedures or other causes.