A/C Compressor and Clutch for 06-10 Dodge Ram 2500 3500 5.9L 6.7L 408Cu Diesel 68182

: Unavailable

: Engines - Components

: YITAMotor

SKU: OG1901W020
- Premium quality
- Guaranteed fit
- Each compressor is tested for noise, leaks, and durability
- Limited lifetime warranty

    $86.99 $89.99


    Have a Question?

    Be the first to ask a question about this.

    Ask a Question

    1. Remove compressor: Remove the A/C belt from the A/C compressor pulley. May involve loosening the belt tensioner (if equipped).
    2. Receiver drier or accumulator, orifice tube or expansion valve.
    3. Disconnect the negative battery cable.
    4. Remove the bolt that secures refrigerant lines to the A/C compressor. Inspect A/C lines for any contamination such as metal or excessive dirt inside of them. If you find any contamination the system will need to be cleaned. Flush the condenser and evaporator using NON-OIL BASED A/C flush. On expansion valve systems. The valve must be removed before the evaporator can be flushed. Flushed condensers from outlet to inlet and evaporators from inlet to outlet.
    5. Drain all the oil from the new compressor, if your compressor has a drain plug you will need to open it up and drain what oil is in there too.
    6. Install half oil charge into the compressor and the remainder throughout the system. Turn compressor shaft 8-10 full revolutions to ensure front seal and other internal parts are lubricated.
    7. Install new receiver drier or accumulator and new orifice tube or expansion valve.
    8. Evacuate the A/C system for a minimum of one hour.
    9. After evacuation install half the refrigerant charge and let the system set for 1 minute. This will allow the refrigerant to pick up oil and spread more evenly throughout the system.
    10. Turn on the A/C system with the engine running and check to see if cold air is now coming out of the air duct.
    11. If the A/C system is functioning, you may find that your electric radiator fan and compressor clutch will be cycling off and on depending on the outside air temperature.

    Pay Attention

    1. Please make sure the installation site is clean. Or, it will cause operating obstruction,
    even make the temperature of the compressor very high, and the belt on the clutch may
    2. Because the item is with oil (100ml)when sent to you, so there is no need to add oil when you
    use it the first time. You need to add the refrigerant, please add them to 70-80%, don't need to fill up. There may be noise if the refrigerant is added too much.

    Package Included:

    1 x A/C Compressor(Professional Installer is Highly Recommended

    Free shipping on all orders. No minimum purchase.
    It normally takes 1-2 business days for us to process your order. Please note that this does not include holidays and weekends.
    Shipping time will normally cost 2-8 business days. Shipping time is estimated and commences from the date of shipping, rather than the date of the order, and can take longer than expected date due to the invalid address, customs clearance procedures or other causes.