For Your Safety Concern,Will NOT BRIGHT enough For Headlight !
Before the installation is completed, please confirm whether the two Bulbs are adjusted to the same color !
About how to switch colors:
Through turning the fog lamp button on or off realize switching colors.
1.Turn on the fog lamp button ,it's white
2.Turn off the fog lamp button,and then turn on the button again,it's yellow.
For your fog lights to get stronger scattering intensity, and better penetrating ability, so our yellow light color design wavelength is longer than the regular yellow, even if you look it will feel a bit red, please rest assured , Everything is for your safety, does not affect the use!
Apply for fog driving light,daytime running light.
1.For DC 12 -24 Volts
2.Package Content: 2 LED Light Bulbs (1 pair)
3.Color Tempurature: 6000K White +3400K Orange Yellow
4.LED Type:UP to160W
6. Cross Reference:H3
Why choose LED headlamps?
The advantages of Automotive LED headlamps:
1. LED lights are more power than traditional halogen energy.
2. Xenon lamp are brighter , but the LED lights light up without delay, which can enhance road safety. Instant start no strong currents impact which can effectively protect the car comes with a battery and improve the battery life of more than 30%.
3. Fast cooling , the appearance of the most advanced design , thermal structure ingenious and reasonable.Less warranty, power driver with wide voltage constant current mode , the car can respond to a variety of voltage instability , the effective protection of normal use Led efficient and simple structure . Fewer Components damaged, repair the probability is very low , compared with HID ballast repair lower than 80% .
4. Low heating temperature which can protect the car . Xenon working temperature is up to 800 ° -1000 ° which is the main reason for the car ignition .
5. LED car headlights simple structure, fewer parts than xenon lamps, significantly lower than the xenon lamp failure rates !
6.The color temperature of Automotive LED headlamps is balancing.The Xenon bulbs in the same color to clear , which is about 6000K.
Main Advantages: · Small Body Size, Easy To Install;Plug & Play(Can be installed within 10 mins right out of the box!)
· 0.01 Second Quick Start,Gives you more safety and reaction time!
· Perfect Powerful with ODM CSP Chip, 360 degree clear beam no blind zone
· 6500K White, this is the most comfortable light for the human eye
Installation Guide: For H8/H9/H11/9005/9006/880/881 Open the front cover of the vehicle Remove the original halogen bulb and take it out Find position of the socket Groove and the Led Body Pin ,then insert Rotate Slightly and make it fixed Turn on the light to test , check the wire connection if not light up, especially +- For H1/H3/H4/H7/H13/9004/9007 Take out the cover of the Headlamp assembly Find the original halogen bulb location and take it out Take out the Led socket Fix the socket and make it firm Find position of the socket Groove and the Led Body Pin,then insert Rotate slightly and make it fixed Connect Wire Plug with connector .Attention:Positive + and negative - Turn on the light to test . Check the wire connection if not light up. Especially + -
Install Caution: 1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
Note: - German brand name of cars may need to tap on Load Resistors to remove the error code on dashboard
- If they don't light after inserting into the socket, insert oppositely
Free shipping on all orders. No minimum purchase. It normally takes 1-2 business days for us to process your order. Please note that this does not include holidays and weekends. Shipping time will normally cost 2-8 business days. Shipping time is estimated and commences from the date of shipping, rather than the date of the order, and can take longer than expected date due to the invalid address, customs clearance procedures or other causes.
For large items such as bumpers, tonneau covers, we generally delivery by Fedex and P.O.Box will not be available for shipping.