Features
- These Lug Nuts are manufactured with the highest quality to meet or exceed OEM Standards.
- Each lug nut is manufactured as 1 solid piece of steel. No cheap plastic end caps.
- Perfect for replacing rusted and/or broken lug nuts.
- The heat-treated coating prevents oxidation and protects the steel.
- Made from Through-Hardened steel with a chrome plating.
- The paint will not fall off easily. Guaranteed!
1. Quantity: | Set of 24pcs |
2. Type: | Bulge Acorn, Closed End |
3. Seat Type: | Conical (Acorn) 60 degree tapered |
4. Nut Height: | 1.4 inch or 36mm |
5. Socket Hex Size: | 19mm or 3/4" |
6. Material: | SCM 435 Steel (Heat Treated) |
7. Finish: | Glossy Chrome Finish( Two layers of nickel + one layer of opaque chrome + one layer clear electrophoretic coating ) |
8. Thread Pitch: | 14x1.5 or 14mmx1.5 or M14x1.5 Threads |
Why Choose US
1. Best Price with High Quality. The price of the products is much lower than that of other sellers, but the quality of our product is not inferior to or even exceed OEM standards.
2. Sophisticated Processing Technology. Those products which sell at very low prices have very poor quality. These did not do the Electrophoretic Coating, just do the spray-painting in a simple way, the coating can easily scrape by nails. And only add one layer of nickel, easy to rust. For those products which sell at very high prices, the processing technology can't better than ours. Try our products, you won't be disappointed, buy with confidence.
Our Products:
- Multi-layers of Nickel (Light Nickel + High Sulfur Nickel + Full Light Nickel + Microporous Nickel ), Excellent Rust Resistance.
- One Layer of Opaque Chrome, Much Strong And Durable.
- One Layer of Clear Electrophoretic Coating, Excellent Scratch Resistance.
Note
- This style of lug nut is used on aftermarket wheels that require a small diameter conical seat lug nut.
- The vehicle compatibility guide refers to the vehicle's wheel stud thread size only.
- Verify Thread Size = These Lug Nuts can fit any vehicle with studs that are the following thread pitch: 14mm x 1.5 / 14x1.5 / M14x1.5 Threads.
- Verify Seat Type = Wheel Lug Holes have a variety of seat types. These Cone Seat nuts will only work with wheels that are manufactured with Cone Seat lug holes. Does not have a cosmetic sleeve over the lug like some factory versions! Please ensure that you are purchasing the correct lug nut model for your wheel seat type.
- Verify Lug Nut Measurements = It is necessary for you to check the diagram of the nut (width/length/etc) to ensure it will work with your wheels. If your wheel studs stick out past your hub more than 35mm (~1.37"), these lug nuts will not fit.
- Avoid using an impact wrench = Improper usage may cause damage to components. Also, using an impact wrench can result in uneven or over-tightening of fasteners, which could damage wheels.
- Check and re-torque after 25-50 miles of driving.
Shipping from the warehouse nearest to shipping address to shorten delivery time. In order to improve our customer shopping experience, we promise NO ADDITIONAL CHARGES.
Free Shipping | A | B |
Shipping Methods | FEDEX Ground | FEDEX Home |
Working Time | Mon. to Fri. | Mon. to Sun. |
Delivery Time | 3-7 Days | 4-7 Days |
Delivery to States (A-Z) |
Alabama, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Georgia, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Lousiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York,North Carolina, North Dakota, Ohio, Oklahoma, Oregon,Pennsylvania, Rhode Island, South Carolina, South Dakota,Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin, Wyoming.
|