7 Days Deal YITAMOTOR® 1997-2003 Ford F-150, 1997-2002 Expedition Front Suspension Kit -RWD Only
free shipping
on all orders
30 days
money back
lowest price
guarantee
safe shopping
guarantee
Description
YITAMOTOR control arms follow strict standards for manufacture. And all parts are rigorously tested to provide a reliable replacement.
Fitment
1997 - 2002 Ford Expedition 2WD
1997 - 2003 Ford F-150 2WD
1998- 1999 Ford F-250 2WD
1997 Ford F-250 4.6L & 5.4L 2WD
2002 Lincoln Blackwood All Models
1998 - 2002 Lincoln Navigator 2WD
There are two different versions of the idler arm for these vehicles.
One is 2.48", other is 3.43"
Our Idler arm with 2.48 Inch Bolt Pattern, pls refer to the pic. and confirm your old one before ordering.
Professional Installation is Highly Recommended, Make Sure to Tighter the Screws
Features
1. OE Replacement
Designed and manufactured to directly replace OE parts for proper fit and alignment.
2. Durability and Strength
Our control arms are forged from a solid piece of steel and are electrophoretic coated for unrivaled durability and strength. Greaseable parts are pre-greased requiring no additional work
3. Pre-greased
YITAMOTOR lubricated the necessary parts and filled enough grease in them, requiring no additional work
Note:
The suspension kit must be installed by professionals who need to carefully read the important instructions shown in the picture. Please test in an empty area before getting back on the road
Package Included
1x Front left upper control arm with Pre-assembled ball joint & bushing - K87261x Front right upper control arm with Pre-assembled ball joint & bushing - K8728
2x Front driver & passenger side Lower ball joints - K8695
1x Front left side outer tie rod end - ES3366
1x Front right side outer tie rod end - ES3367
2x Front tie rod adjusting sleeve - ES3368
1x Front left inner tie rod end - ES3364
1x Front right inner tie rod end - ES3365
2x Front sway bar links - K8772
1x Front Pitman Arm - K8700
1x Front steering idler arm [2.48" Bolt Pattern] - K8739
California Residents: Prop 65 Warning
WARNING: Cancer and Reproductive Harm
Visit: Prop 65 Warning
Specifications
| Brand | YITAMOTOR |
| Fitment Type | Direct Replacement |
| Part Type | Control Arm Bushing Kit |
| Greasable or Sealed | Greasable |
| Surface Finish | Polished, Rust Protected |
| OE Spec or Performance/Custom | OE Spec |
| Warranty | 2 Year |
| Package included |
1x Front left upper control arm with Pre-assembled ball joint & bushing - K8726 1x Front right upper control arm with Pre-assembled ball joint & bushing - K8728 2x Front driver & passenger side Lower ball joints - K8695 1x Front left side outer tie rod end - ES3366 1x Front right side outer tie rod end - ES3367 2x Front tie rod adjusting sleeve - ES3368 1x Front left inner tie rod end - ES3364 1x Front right inner tie rod end - ES3365 2x Front sway bar links - K8772 1x Front Pitman Arm - K8700 1x Front steering idler arm [2.48" Bolt Pattern] - K8739 |
Easy Return
At YITAMOTOR, Your order means a lot to us, Feel free to contact us if you have any questions.
Not satisfied with it? We offer returns for products in new/unused condition within 30 days of delivery for a refund or exchange.
Returns or Exchanges items in 4 easy steps, and Appointment FedEx pickup service for you, hope you enjoy our safe and worry-free after-sales service.
Shipping
1. Item processing time
Note:
1. It may be delayed during holidays, such as Black Friday, Christmas, New Year, etc. Or under special weather conditions.
2. We will ship your item only by FEDEX, Please do not leave PO.BOX address.
Description
YITAMOTOR control arms follow strict standards for manufacture. And all parts are rigorously tested to provide a reliable replacement.
Fitment
1997 - 2002 Ford Expedition 2WD
1997 - 2003 Ford F-150 2WD
1998- 1999 Ford F-250 2WD
1997 Ford F-250 4.6L & 5.4L 2WD
2002 Lincoln Blackwood All Models
1998 - 2002 Lincoln Navigator 2WD
There are two different versions of the idler arm for these vehicles.
One is 2.48", other is 3.43"
Our Idler arm with 2.48 Inch Bolt Pattern, pls refer to the pic. and confirm your old one before ordering.
Professional Installation is Highly Recommended, Make Sure to Tighter the Screws
Features
1. OE Replacement
Designed and manufactured to directly replace OE parts for proper fit and alignment.
2. Durability and Strength
Our control arms are forged from a solid piece of steel and are electrophoretic coated for unrivaled durability and strength. Greaseable parts are pre-greased requiring no additional work
3. Pre-greased
YITAMOTOR lubricated the necessary parts and filled enough grease in them, requiring no additional work
Note:
The suspension kit must be installed by professionals who need to carefully read the important instructions shown in the picture. Please test in an empty area before getting back on the road
Package Included
1x Front left upper control arm with Pre-assembled ball joint & bushing - K87261x Front right upper control arm with Pre-assembled ball joint & bushing - K8728
2x Front driver & passenger side Lower ball joints - K8695
1x Front left side outer tie rod end - ES3366
1x Front right side outer tie rod end - ES3367
2x Front tie rod adjusting sleeve - ES3368
1x Front left inner tie rod end - ES3364
1x Front right inner tie rod end - ES3365
2x Front sway bar links - K8772
1x Front Pitman Arm - K8700
1x Front steering idler arm [2.48" Bolt Pattern] - K8739
California Residents: Prop 65 Warning
WARNING: Cancer and Reproductive Harm
Visit: Prop 65 Warning
Specifications
| Brand | YITAMOTOR |
| Fitment Type | Direct Replacement |
| Part Type | Control Arm Bushing Kit |
| Greasable or Sealed | Greasable |
| Surface Finish | Polished, Rust Protected |
| OE Spec or Performance/Custom | OE Spec |
| Warranty | 2 Year |
| Package included |
1x Front left upper control arm with Pre-assembled ball joint & bushing - K8726 1x Front right upper control arm with Pre-assembled ball joint & bushing - K8728 2x Front driver & passenger side Lower ball joints - K8695 1x Front left side outer tie rod end - ES3366 1x Front right side outer tie rod end - ES3367 2x Front tie rod adjusting sleeve - ES3368 1x Front left inner tie rod end - ES3364 1x Front right inner tie rod end - ES3365 2x Front sway bar links - K8772 1x Front Pitman Arm - K8700 1x Front steering idler arm [2.48" Bolt Pattern] - K8739 |
Easy Return
At YITAMOTOR, Your order means a lot to us, Feel free to contact us if you have any questions.
Not satisfied with it? We offer returns for products in new/unused condition within 30 days of delivery for a refund or exchange.
Returns or Exchanges items in 4 easy steps, and Appointment FedEx pickup service for you, hope you enjoy our safe and worry-free after-sales service.
Shipping
1. Item processing time
Note:
1. It may be delayed during holidays, such as Black Friday, Christmas, New Year, etc. Or under special weather conditions.
2. We will ship your item only by FEDEX, Please do not leave PO.BOX address.
