We all know that headlights are an essential component of our car. and it can provide great brightness to ensure your safety when driving at night. Most people are confused about how to adjust the headlights. Here's a quick-and-dirty guide to help you better use your headlights.
Before you begin to adjust the light, make sure to check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.
Find the adjustment screws
Firstly, locate the adjustment screws on your vehicle.
Adjust the headlights individually
The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.
Adjust the vertical field
The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.
Adjust the horizontal field
The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.
Test your results
Finally, test your headlight.
It is quite easy to adjust your headlight. If you follow these instructions, you'll have a better chance at dodging wayward deer on the roads—and other drivers will appreciate your hard work.