Yitamotor - Online Auto Parts Stores & Websites

03-07 Chevrolet Silverado/Avalanche 1500/1500HD/2500/2500HD/3500, Headlight Assembly

Be the first to review this product

$86.99

Availability: In stock

Quick Overview


  • Unique Look: Stylish design and light placement brings fresh, luxurious look to your vehicle.

  • High grade ABS plastic:for toughness, impact resistance, and heat resistance.

  • Plug-n-play installation: fully compatible as replacement for factory parts.Bulbs not include.

  • High Quality: Fully sealed, waterproof, dust and corrosion resistant, works perfectly even in harsh weather conditions.

  • OEM: Made by OEM approved & ISO certified manufacturers, with material that meets or exceeds OEM requirements.


  • Description
  • Reviews

Details

Headlight Assembly kit for 03 04 05 Chevy Avalanche / 03-07 Chevrolet Silverado 1500HD / 03-06 Chevrolet Silverado 2500HD Headlamp,Black Housing with Tinted Signal Driving Light

It is the time to change your ​Headlights Assembly!!!

Why wasting so much money on the car maintenance shop? You just need a new headlight assembly, and your car will look new soon.

​Product Description

Product Features:

Working Voltage: DC 12V
Power: 55W
Bulb Type: 9006 Halogen Bulb
Replace Parts Number: GM2502224, GM2503224 
Hollander Number: 116-59500R / 116-59501L

Compatible Models   

2003-2006 Chevy Silverado 1500
2003-2004 Chevy Silverado 2500
2003-2006 Chevy Silverado 2500 HD and 2003-2006 Chevy Silverado 3500
2007 Chevy Silverado 1500/1500 HD/2500 HD/3500 Classic Body Pickup Only
Also Fit 2003-2005 Chevy Avalanche (Without Body Cladding - Plastic Sides Cover!!!!)
 

Easy install

Installation recommendations:
  • Step 1: Consult a vehicle manual to find out which component needs to be removed to get access to the headlight assembly. Depending on the year, make, and model of the vehicle, the front grill may need to be removed. To remove the grille, you have to undo the screws or any fastener used to secure it.
  • Step 2: Undo the screws, clips, or retainer springs that hold the headlight in place. You may have to use a flat-blade or Phillips screwdriver to remove any of these fasteners that are typically located at the top and bottom of the headlight.
  • Step 3: Disconnect the wiring from the assembly. After the wiring is removed, you can now detach the headlight from the vehicle to replace it with a new one.
  • Step 4: Fit in the new headlight assembly. Fix the new headlight into place and make sure that the screws, clips, or retainer springs used are sealed.
  • Step 5: Reconnect the wiring that was unplugged from the assembly.
  • Step 6: Put back the grille and other components that you removed. Seal them back into place.
  • Step 7: Test the new assembly. Switch on the headlights to see if they’re working. If not, then make some adjustments and check the manual.

About US

Are you troubled by any of these?
  • Need more stylish parts for your car?
  • Factory headlights not bright enough? Are they yellow and outdated?
  • Inefficient light spread or range? Oncoming traffic not noticing your headlights and dazzling you with their high beam? Afraid of driving at night time out of fear for accidents?
A new pair of new headlights may be your answer to all of the above.
Why buy from Autosaver88?
  • Style — Say goodbye to murky factory lenses and muddy yellow light.
  • Safety — Make yourself easier to distinguish on the road with some white LED lights.
  • Quality — Produced in vacuum environment, waterproof, tested for airtight. Made by OEM approved & ISO certified manufacturers. Material meets or exceeds OEM requirements.
  • Satisfaction — Shipped from continental US for fast delivery. Responsive service.
Important: Please verify your vehicle is listed under “compatible models” prior to confirming your order. Please only install parts that are compatible.
FAQ:
  • There is a gap after adjustment. How to fix it?
Our headlights’ design 100% matches with the original car molds. The gap exists by design but should be no bigger than 0.12” from the sheet metal. During installation, slowly adjust the position of the kit to minimize or completely cover the gap while tightening the screws. Secure the screws once no gaps exists. A slight gap, however, will not affect driving.
 
  • There is fog in the headlight. What to do?
After installation, moisture contained within the material itself may be released at high temperature and form fog. Also after new installation, hot air discharged from the lights can encounter cold air and form a vacuum shrink, which can forcefully suck moisture into the headlight and form fog or droplets. After installation, please check all seals to ensure they are still airtight. Unless there is problems with the seals, the fog should dissipate after 3-7 days.

Write Your Own Review

  1 star 2 stars 3 stars 4 stars 5 stars
Value
Quality
Price